How to replace a LED parking light?

How to replace a LED stop light?

As everyone knows, a stop light is a hopelessly important ensuring measure for our on-road safety, there are many people are get used to consult the professional garage, actually, you can stand on yourself with a little effort. Here below are some tips for replacement procession.

Ensure the type and wattage fit for your particular vehicle by referring to your owner's manual. And remove all the casing or bulb trim and set it aside for preparation.

2.? Locate and pull out the traditional halogen socket, take out the original halogen one, if you are not familiar to the exact position just search for the screwdriver to screw the plastic or glass lens out.

The halogen one awaitting the replacement

3. Reach out for the LED BA15d parallel bulb or LED T10.

Take the LED T10 bulb for model but the LED BA15D parallel pin bulb is optional also.

4.Plug the bulb in the socket

Just insert the bulb into the socket
5. Connect the electricity to check the real illumination situation. Do the self-test (with the broomstick) or get a friend or a large mirror situated so you can see from the driver's seat whether the brake lights go on and when you apply pressure to the brake pedal.

The lighting situations piror to "off"status
6. If it works well, put the integrated light into the original setting place
Reset the led T10 bulb into the original position

7. Turn on the switch and recheck the lighting through the lamp housing.

The lighting output satisfys you??

8. If they don't go on well, double check your procedure, if the situation recurs continually, you may have a bad socket, which will requires to ask for professional mechanic’s help.